Blood Pressure Monitor

The Omron M3 comfort is a clinically validated blood pressure monitor that makes it easy to keep track of your hypertension at home
From Omron, the number one recommended brand by cardiologists for home blood pressure monitors in Europe
Omron’s unique Intelli Wrap Cuff takes away the hassle of cuff placement on the upper arm – giving accurate blood pressure measurements in any position around the upper arm
Cuff wrap guide and body movement detection indicators help you to avoid common mistakes that can cause inaccurate blood pressure readings
The M3 Comfort can be used by two separate users + a guest and stores up to 60 blood pressure readings per user

Key Features
Device Type: Upper Arm Blood Pressure Monitor.
User Type: Hypertensive
– Diabetic Patients
– Pregnant Women
Irregular Heartbeat Detection (IHB): Accurate results in any position around the upper arm.
Hypertension indicator: Indicates if result is above recommended level.
Body Movement Detection: Signals if too much movement is detected during measurement, to avoid inaccurate readings
Cuff Wrap Guide: The Omron M3 Comfort has an indicator to let you know that your cuff is wrapped correctly.
Memory: 2 users x 60 memories + guest mode. Your monitor can store data for two separate users, enabling you to track individual readings and trends.

How do I assemble and use the upper arm cuff (small, medium, large or wide range)?
When the cuff is assembled correctly, the Velcro hook material will be on the outside of the cuff loop and the metal ring will not touch your skin. If the cuff is open, pass the end of the cuff furthest from the tubing through the metal ring to form a loop. The smooth cloth should be on the inside of the cuff loop.
1. Remove tight-fitting clothing from your upper arm.
2. Sit in a chair with your feet flat on the floor.
3. Put your left arm through the cuff loop. The bottom of the cuff should be about 1 – 2 cm above your elbow (thickness of your index or middle finger). Adjust the cuff around your arm so that the tubing runs down the centre of your arm in line with your middle finger (palm open and facing upwards).
4. Secure the cuff around your arm using the cloth closure. Pull the cuff so that the top and bottom edges are tightened evenly around your arm.
5. The cuff should be firmly secured but not too tight – just enough so that it is difficult to slide 2 fingers under the cuff. This space is imperative for an accurate reading. Omron’s digital Blood Pressure Monitors use the Oscillometric method of blood pressure measurement that detects your blood’s movement through your brachial artery and converts this movement into a digital reading.
6. Relax your arm and place your elbow on the table so that the cuff is at the same level as your heart. Turn the palm of your hand upward.
7. Check there are no kinks in the air tubing. Be careful that you do not rest your elbow on the air tube when taking a blood pressure reading.
8. Press the ‘O/I START’ or ‘START’ button to begin the blood pressure reading.
For additional information please refer to the Instruction Manual for your device.

How can I clean my blood pressure monitor?
Wipe the casing of the monitor clean using a soft dry cloth. Never use any abrasive type cleaners or submerge the monitor or any of the components in water. The cuff can be cleaned with a soft moistened cloth and a mild soap.